(Reduced) Silencer's for Sale 1/2"X20 UNF Aluminum Design

[parisd20]

Thanks

[parisd20]

Up it goes

[Accuspell]

I am waiting to see some of these comparisons that keep getting promised.

The thing that puts me off is the sheer weight - yes, it is substantially made, but 250 grams on the end of the barrel? That is 8oz I think the handling of the rifle will be compromised. If you only ever shoot off a bipod, prone, then it wouldn't be so bad - but if you shoot offhand, like I do most of the timme, then it is a big handling deficit, just like the Harris type bipod is. They are also added weight where you don't want it.

Come on folks, lets see those comparisons, from purchasers. AND CAN WE PLEASE nOT HAVE ANY MORE WASTED PAGES ON FURTHER BUMPS. That has put me right off buying one, because it makes look as though Paris is desperate. If they were that good, he would be getting plenty of feedback from owners, not purported feedback from himself.

[poorshot]

Hi Paris.
I finally got around to comparing your silencer to four others.
I was very impressed.
Using the average over three shots.
The Logun reduced the sound output by 8db
The Parker Hale by 10.6db
Yours by 10.9db

Regards PS
Hi Paris.
I thought I should update and correct my findings on the silencers.
First the correction as the Lugun and Parker Hale was loaned to me,
I've found out that the Parker Hale was in fact a Daystate Airstream.


The Gun un-silenced was producing 13.3db
The 170mm Steel Logun reduced it to 5.3db
The Daystate Airstream reduced it to 2.7db
Yours reduced it to 2,4db


Regards PS.

[parisd20]

Thanks for the comparison look I know in UK I don't sell many of my silencers but I dons really care as I sell in all around the globe.
UK market is in good due to the 12 FTP limitation my silencer it's too much for this little power but for FAC that's were mine is one of the best.

[WelshWhizzz]

Hi Paris, do you make these so the silencer fits flush to fit on r10 mk2 with shrouded barrel
regards
phil

[parisd20]

Sorry I only make them 1/2" UNF type for threaded barrels or you can use adaptor in shrouded barrels.

[parisd20]

Up it goes

[thesmi]

my comparison is that
my hw is much quieter and half the price tried this on 12ftlb and a 30ftlb 22 and a 54ftlb .25 the hw wins each time

ive tried to put foam inside the parisd one but seemed to make it noiser
the build quality it very good no issues there.

when i get a chance i will try it on a rimfire


before anyone jumps on this thread crying please feel free to come to harlow essex and i can show you

[parisd20]

The Silencer's has 1/2"X20 UNF threads so it screws on all threads on airgun barrels.
It is for a 1.77, .20, .22 and .25cal(can be made for bigger cal upon request). It is very quiet and POI does not change whether you have on or off the Silencer from your airgun.
It is all machined aluminum 6026 inside and out.
The inside its perfectly made to allow an even air flow in order to give perfect results in reduced noice and Stable POI.
The Silencer makes your gun longer 20cm(7.87") with diameter 39mm(1.53").
The Silencer weights 250 grams.
Very solid Design can handle any power even rimfires .22
Price is GBP75 shipped.
Payments:PayPal at parisd100@gmail.com