MW Super Silent Sound Moderators - Prototype Silencers

[mikey]

Recieved my MW SS as promised today. On opening the packet i was very impressed not only with the quality of the finish and build but also the lightness of it. Not only that but it was shorter than the current Air Arms model i currently had fitted, which is always a plus.

So out came my AA S400 and off came the standard model, the MWSS was a very tight fit and took some persuasion to get it on, but once on there it butted up nicely against the barrel shoulder. (with regards to the tight fit i 100% blame that on me rather than Matt's workmanship, as an engineer myself i know how these things are made to very tight tolerences and measuring with a tape measure out of a sewing kit wasn't really the best idea, to this end if you are going to buy one of these try and get hold of a vernier caliper or similar to ensure a perfect fit)

Next came the feild test (AKA as the back garden). I popped on the old Air arms model again and rattled of 20 or so shots down the garden to get used to the noise level. Reffiting the MWSS and doing the same i instantly noted not only a drop in noise level but more noticabley a much softer tone to the noise that was produced, so all in all an improvement. Whilst not a scientific test by any means i'm amazed by the improvement made over the old AA model, if i can hear (or not in this case) a major improvement from a firer's point, then down field then that improvement will be massive.

I will quite happily recommend one of these to anyone and i'm sure you will not be dissapointed, for the money you can't go wrong.

what is the length ot this silencer?

[jay726]

not sure if you're asking mattw or me mikey but i'm sure matt won't mind me saying its 186mm bud

[mikey]

not sure if you're asking mattw or me mikey but i'm sure matt won't mind me saying its 186mm bud

have you tested this against the weihrauch silencer?

[mattw975]

Hi All,

Personally, I have never tested the MW Super Silents against a Weihrauch, a Logun or a Twink Mk 2, etc

A lot of people get hung up on which is the quietest silencer, when tested with a DB meter at 1M.

Is this really a realistic test for an airgun silencer where the quarry will be between 10-40 M away ?

At this sort of range, all the curler & baffles design units will be pretty close in performance. Each will make a different tone however, which to the human ear will sound louder or softer depending upon many factors.

If used for hunting, the crack of pellet against bone is much louder than the gun report on a silenced air rifle anyway.

I ought to test the performance at some stage, but when the majority of people give me good feedback from my designs really that is good enough for me.

Cheers,

Matt W

have you tested this against the weihrauch silencer?

[mattw975]

Sorry about the delay, all questions replied to

[Oilysean]

I can certainly tell you that the crack of the pellet hitting the quarry is FAR louder then the shot itself from my rifle. Even at 50+ yards!


With one of matts silencers of course

[mattw975]

Well put mate

I can certainly tell you that the crack of the pellet hitting the quarry is FAR louder then the shot itself from my rifle. Even at 50+ yards!


With one of matts silencers of course

[robert2933]

you have pm

[mattw975]

Right back at ya mate

you have pm

[robert2933]

hi matt you have pm