S200 wobbly stock problem

[brettguise]

photo (5).jpg

So just got my s200 after work. Its used but the condition is very good. I did however notice that the fore stock wobbled a lot and felt like it was going to fall off. (This is the MK1) I checked the screw it was slightly loose and tightened it up. I'm still unhappy however as it moves slightly still. I have also noticed that the fore stock and air cylinder do not line up straight with the barrel.

Any fixes known for this? Any screw that I am missing?

[1shot1kill]

Should be a hardened plastic washer recessed into the stock , 1 spring washer , 1 alen key screw , try packing underneath the cylinder - level it out , never overtighten the screws ,. . Last thing you want is crossed threads ,

[brettguise]

Its a normal flat headed screw on mine? has this been changed? Im taking it to be serviced on Sunday so hopefully they can sort it out if I can't.

[tatsumi]

I got a pack for my mk2 stock, stainless with allen head. There slightly longer than the stock screw so i ground them down to size. Happy to post you a pair out if you want. Pm me if so

[brettguise]

Been through a service, barrel wasn't bent the screw connecting the cylinder is slightly threaded. It tightens up but goes in slightly off centre resulting in it being slightly off. Other than that flew through one or two seals changed not bad for a 7 year old gun. It was firing at 10.2 ft/lb and has now been upped to 11.6 ft/lb. Cant wait to get out in the field with it now.

[1shot1kill]

the s200 is one of the ,most accurate pcp air rifles ive used , good choice there mate