for all that have asked about hpa ratty

[The Robin]

http://www.rap4uk.com/Storm-Air-Adapter-p/2146.htm[/QUOTE]

Can anyone advise what this bit is? (circled)
I'm doing my xmas list and can work out what it is

Attachment 33447
..and from where to get one??

I've listed the adapter, the elbow and 12" hose then the "connector bit I don't know" then the Guerrilla Air MYTH 13ci tank..
Any help greatly appreciated

Danny

The link is above Danny , Rap4 is a good site for things. Get your order in fast though because i think i waited about 3 weeks or so and xmas is coming

The Robin

[ratman60]

not sure where to put this guide
righto here we go
first thing you will need is a co2 eliminator from gmac
http://www.gmaccustomparts.com/epage...roducts/CBEL50
next you will need a 1/8 npt adaptor to screw in to the co2 eliminator
take your pick from straight or 90 degree elbow from here
http://www.rap4uk.com/CO2-Air-Adapter-s/62.htm
and finally you will need a hpa bottle and remote line
this is the bottle i have and it is regulated at 800-850psi,at a 170 bar charge will give at least 80 shots
bottle and remote line here
http://www.rap4uk.com/Guerrilla-Air-.../ms805-1pi.htm
my ratty has a different set up,i have a braided hose on mine and my bottle holder is fixed to the underside of the pistol grips,braided hoses are also available on rap4uk,i don't know where the bottle holder i have was bought from,i got it from the pierced 1 so maybe he can shed some light on where it came from
braided hoses here
http://www.rap4uk.com/Air-Line-s/1504.htm
if you can find the same bottle holder i have i would recommend the 12 inch braided hose if not not the remote coil hose is just as good and will do the job
how to bulk fill a ratty

hello can you do the same for an 850 air magnum thanks

[andyz1000]

hello can you do the same for an 850 air magnum thanks

i dont have an air magnum so i can't help
plenty have done it,use the search facility or google
i believe best fittings sell an adaptor for the 850 and the 13 ci bottle i allready mentioned fits straight on
but as i dont have an 850 i couldn't tell you
sorry

[Herr Frii]

Hi, airgun-converting folk. Great thread. I'm halfway through making a few conversions to my salvaged Ratty and have a few questions.

Pinning the valve - can someone please explain how and why it's done.

The on/off valve you purchased, AndyZ - did it do the job...?

Any other safety issues that need to be addressed regarding the HPA conversion of the 2250b...?

Thanks in advance...